Premium Unlimited Residential Proxies
Unmetered residential bandwidth on a dedicated high-speed tier: pick a throughput from 200 Mbps up to 3 Gbps, get 70% Tier 1 IPs, and connect through a hostname assigned to your plan.
Specs
- Coverage: worldwide country targeting, plus US state, city and ISP targeting
- Bandwidth: unmetered (only your plan's Mbps cap applies)
- Speed tiers: 200 – 1,000 Mbps in 100 Mbps steps, plus 1.5, 2, 2.5 and 3 Gbps
- IP quality: 70% Tier 1 IPs; 600K+ USA and 200K+ GB IPs daily, 1.5M+ daily active users across the network
- Terms: 1, 7, 30 or 60 days
- Protocols: HTTP, HTTPS (CONNECT), SOCKS5
- Sessions: rotating or sticky (up to 24 hours)
- Best for: high-throughput scraping and automation that needs a guaranteed speed tier
Premium vs Unlimited Residential
| Premium Unlimited Residential | Unlimited Residential | |
|---|---|---|
| IP quality | 70% Tier 1 IPs | mostly Tier 3 countries |
| Gateway | Your plan's own hostname (dashboard) | unlim.flashproxy.io |
| Ports | 10000 (HTTP) / 6969 (SOCKS5) | 10507 (both) |
| Speed tiers | 200 Mbps – 3 Gbps | 200 Mbps – 3 Gbps |
| Targeting | country; US state, city or ISP | country |
| Sticky sessions | very long: up to 24 hours (seconds) | standard: up to 2 hours (minutes) |
| Extend a plan | yes, same speed tier | no, buy a new plan |
Connect
Gateway: every plan gets its own hostname — copy it from the plan page in the dashboard. Ports are 10000 (HTTP) and 6969 (SOCKS5). In the examples below, replace YOUR_PLAN_HOST with that hostname.
# Rotating — a fresh IP on every request
curl -x "http://USERNAME:PASSWORD@YOUR_PLAN_HOST:10000" https://api.ipify.org# SOCKS5 (socks5h resolves DNS through the proxy)
curl -x "socks5h://USERNAME:PASSWORD@YOUR_PLAN_HOST:6969" https://api.ipify.orgThe plan page also has a proxy generator that builds ready-to-use proxy lists with your hostname, credentials and targeting filled in.
Request parameters
Targeting and session options are encoded into the username, appended as -key-value pairs after your base username. Your password stays the same.
| Parameter | Format | Example | Notes |
|---|---|---|---|
| Country | country-<iso2> | country-us | Any ISO 3166 two-letter code, lowercase |
| US state | state-<code> | state-tx | Two-letter US state code, lowercase |
| US city | city-<name> | city-newyork | Lowercase, no spaces |
| US ISP | isp-<name> | isp-comcast_cable | Lowercase, _ between words |
| Sticky session | session-<digits> | session-12345678 | 1–16 digits; omit for a rotating IP |
| Session length | time-<seconds> | time-600 | 1–86400 seconds; needs a session |
Use one location per request: a country, or a US state, or a US city, or a US ISP. They don't combine — if you send more than one, only one is applied (ISP first, then city, then state, then country), so isp-comcast_cable with state-tx gives a Comcast IP anywhere in the US, not one in Texas. State, city and ISP targeting are US only; ASN and ZIP targeting are not available.
City names are written in lowercase with spaces and punctuation removed — New York becomes newyork, Los Angeles becomes losangeles. A city doesn't need a country, and a state doesn't narrow down a city name shared by several states (for example Springfield).
Only target locations from the list in the proxy generator on your plan page — it shows every country, US state, city and ISP you can pick, with the number of devices online. A location that isn't available doesn't fall back to a random IP: the connection fails. State accuracy depends on IP geolocation, so a small share of IPs can resolve to a neighbouring state.
Examples
# Rotating — United States
curl -x "http://USERNAME-country-us:PASSWORD@YOUR_PLAN_HOST:10000" https://api.ipify.org# Rotating — New York City
curl -x "http://USERNAME-city-newyork:PASSWORD@YOUR_PLAN_HOST:10000" https://api.ipify.org# Rotating — Texas
curl -x "http://USERNAME-state-tx:PASSWORD@YOUR_PLAN_HOST:10000" https://api.ipify.org# Rotating — Comcast home IPs anywhere in the US
curl -x "http://USERNAME-isp-comcast_cable:PASSWORD@YOUR_PLAN_HOST:10000" https://api.ipify.org# Sticky — hold the same German IP for 10 minutes
curl -x "http://USERNAME-country-de-session-12345678-time-600:PASSWORD@YOUR_PLAN_HOST:10000" https://api.ipify.orgSessions
Without session, every request gets a new IP. Add session-<digits> to keep the same IP, and time-<seconds> to set how long it holds (up to 24 hours) — use a new session number whenever you want a fresh IP. See Rotating & sticky.
Trials and extensions
- Trial: 1 hour at 200 Mbps ($20) or 1 Gbps ($35).
- Extend: add 1, 7, 30 or 60 days to an active plan from its plan page. The speed tier and credentials stay the same.
- Trials, and plans that have already expired, can't be extended — buy a new plan instead.
Pricing
Choose a speed tier and term in the dashboard to see the price before you buy.
Quickstart
- Buy a Premium Unlimited Residential plan in the dashboard.
- Open the plan and copy its hostname, username and password.
- Connect to port 10000 (HTTP) or 6969 (SOCKS5), adding one location (country, US state, city or ISP) or a session to your username if needed.